Product Description:
Advantages and features of Anvochi filter
High-efficiency and precise filtration: It adopts filter disc filtration technology with special structure, which has precise and sensitive performance, ensuring that only particles with a particle size smaller than the required size can enter the system. There are various specifications, including 5μ, 10μ, 20μ, 55μ, 100μ, 130μ, 200μ, etc. Users can choose filter discs of different precisions according to their needs.
Good air permeability and high strength: The filter element adopts highly hydrophobic and oleophobic fiber filter material, and is equipped with a skeleton with good permeability and high strength to reduce the filtration resistance.
Modular design: Based on the standard disc filter unit, according to the modular design, users can choose according to their needs, which is flexible and interchangeable. The system is compact and occupies a very small area.
Fully automatic operation: In the filter combination, the backwashing process between each unit is carried out alternately, and the working and backwashing states are automatically switched to ensure continuous water discharge and very little water consumption for backwashing.
Long service life: The new plastic filter element is strong, wear-free, corrosion-free, and rarely scaled. It has a long service life, and the filtration and backwashing effects will not deteriorate due to the use time.
Low maintenance: The products meet the corresponding quality standards. All products are tested and tested under simulated working conditions before leaving the factory. They have few parts, are easy to use, and require almost no daily maintenance.
Precautions for the use of Anvochi filters
Filter element maintenance:
The filter element is the core component of the filter and is a consumable part that requires special maintenance and care.
After the filter has been working for a long time, the filter element intercepts impurities, which will cause pressure to increase and flow to decrease, and needs to be cleaned in time.
The filter element must not be deformed or damaged during cleaning.
The service life of filter elements of different materials is different. It is recommended to replace PP filter elements every three months, and activated carbon filter elements every six months. Fiber filter elements are generally placed at the rear end of PP cotton and activated carbon. Ceramic filter elements can usually be used for 9-12 months.
Installation precautions:
Avoid excessive force during installation to avoid causing the connection between the pressure regulating valve and the cylinder angle valve to be too tight and inconvenient to disassemble.
When the pressure regulating valve and the angle valve are connected in reverse, they should be aligned first, then the handwheel should be rotated counterclockwise, and tightened by hand to avoid air leakage.
Do not disassemble, adjust or repair the pressure regulating valve by yourself. If you find it blocked, you can replace it with a new valve or have it repaired by a professional.
Regularly check whether the connection between the filter pressure regulating valve and the hose is firm and whether there is air leakage.
The small hole on the pressure valve cover is used to maintain the balance of internal and external air pressure. During normal use, the outside should be kept clean to avoid blockage.
Operating environment requirements:
The working pressure range is 2 bar to 16 bar, the medium temperature range is -10°C to +60°C, and the ambient temperature range is -10°C to +60°C.
The medium is compressed air or neutral gas.
Other precautions:
If the valve itself has a pressure gauge, the pressure gauge should be installed on the pipes before and after the valve.
The filter is generally installed on a horizontal pipe, and the bellows pressure reducing valve should be installed upside down.
The installation position should be selected in a vertical direction, and it can be assembled into blocks.
| Application | Hydraulic Systems |
| Operating Temperature | 0-100°C |
| Type | Hydraulic Relief Valve |
| Seal Material | Nitrile |
| Temperature Range | Up to 80°C |
| Spool Symbol | P – TA |
| Pressure Range | 5-350 bar |
| Productgroup Id | 9,10,11,12,13,14 |
| Certifications | ISO 9001, CE |
| Port Size | NPT |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.
Product Tags:
|
|
AVENTICS 0821300382 Filter Pressure Regulator High Efficiency Precise Filtration Images
|
